Below are the steps to run a Wyze camera on a solar panel with a battery. This setup should run indefinitely as long as there is enough sun to charge the battery. The battery below is 8Ah and should run the Wyze camera for several days even without the solar panel. A larger battery would run longer, and a larger solar panel would charge faster. Several cameras can be run from the same setup as long as the components are scaled up.
Things to get:
Solar panel with charge controller
Wyze V3 camera
12v Battery
Steps:
1. Locate somewhere sunny. The more sun, the more the battery will stay charged.
2. Connect the solar panel to the charge controller
3. Connect the 12v battery to the charge controller
4. Plug the camera into the charge controller
Alternate setup using a USB battery
Replace 12v battery with a USB battery
Steps 1 and 2 are the same
3. Connect the USB battery to the USB output on the charge controller
4. Plug the camera into the USB battery
Things to get:
Solar panel with charge controller
Wyze V3 camera
12v Battery
Steps:
1. Locate somewhere sunny. The more sun, the more the battery will stay charged.
2. Connect the solar panel to the charge controller
3. Connect the 12v battery to the charge controller
4. Plug the camera into the charge controller
Alternate setup using a USB battery
Replace 12v battery with a USB battery
Steps 1 and 2 are the same
3. Connect the USB battery to the USB output on the charge controller
4. Plug the camera into the USB battery